eXTReMe Tracker
Dec 282011

To monitor the instantaneous network usage, execute the ifstat command in bash. You may need to acquire it from a repository if you don’t have it already.

sudo apt-get install ifstat

To display usage on eth0, with a 5 second delay, just once:

ifstat -i eth0 5 1

You can change the number of seconds, and the number of times you want the output displayed. If you don’t specify the count, it will go on forever until you ctrl-c out of it.

So here is a script that displays the download rates in MB/s and upload rates in KB/s every 5 seconds until you hit ctrl-c.

while :
# Press ctrl-c to exit
x=`ifstat -i eth0 5 1 | tail -1 | tr '\t' ' '`;  #tail -1 takes the DL and UL speeds in KB/S
x1=`echo $x | cut -d ' ' -f1`; x2=`echo $x | cut -d ' ' -f2`;
x1=$(echo "scale=3; $x1/1024" | bc); # Convert DL rate to MB/S
printf "D: %0.3f MB/s\t U: %0.3f KB/s\n" "$x1" "$x2"
Dec 272011

One mild inconvenience while using Linux Mint is the default Google search in Firefox search bar. The plain ol’ google search is reformatted, and wrapped within a Linux Mint flavoured wrapper. Its not the end of the world – you can always go to google.com and then search the same word or phrase. However, many people have gotten into the habit of performing their search using the search bar on top left corner within Firefox. Getting a Linux Mint wrapper around just doesn’t look right.

Someone figured out that the google.xml file used in the search plugin was modified in the Mint distribution to create give the modified results. In order to get the original google results, just type in the following command lines:

cd /usr/share/linuxmint/common/artwork/firefox/
sudo wget http://mxr.mozilla.org/firefox/source/browser/locales/en-US/searchplugins/google.xml?raw=1 -O google.xml.fixed
sudo mv google.xml google.xml.orig
sudo mv google.xml.fixed google.xml
sudo cp google.xml /usr/lib/firefox-addons/searchplugins/en-US/google.xml

Restarting Firefox (maybe a few times) is required to get the google results in the plain old familiar format.

The above code was obtained from: Change Back Google Search in Linux Mint

Dec 062011

The newer releases of Ubuntu and Linux Mint have started getting stuck during LiveCD installation or after distribution/kernel upgrade.  Usually the point where it gets stagnant is when it reaches this line:


Nothing happens past that point. A solution or a workaround to this is to insert the nolapic acpi=off switch in the grub boot line. There are 3 ways to do this:

1: If you are starting a fresh install from a CD and the installation pauses at the kernel_thread_helper line, you need to restart your computer.

When you boot from your installation CD, choose F6 before you continue trying out the LiveCD. This give you boot option at the bottom of your screen.

At the very end of the line add nolapic acpi=off and hit enter to continue booting from LiveCD. In most cases this should work.

2. The same problem may arise when you do a distribution upgrade or even a kernel upgrade. In that case you need to change your grub.cfg file. Follow these steps:

sudo nano /boot/grub/grub.cfg

Enter your sudo password and it will bring you to your grub menu configuration.

Look for the section that read similar to this:

menuentry 'Ubuntu, with Linux 2.6.38-11-generic' --class ubuntu --class gnu-linux --class gnu --class os {
 set gfxpayload=$linux_gfx_mode
 insmod part_msdos
 insmod ext2
 set root='(hd0,msdos6)'
 search --no-floppy --fs-uuid --set=root 337e2841-fc82-61b3-84be-5a9c71ae43b8
  linux   /boot/vmlinuz-2.6.38-11-generic root=UUID=337e2841-fc82-61b3-84be-5a9c71ae43b8 ro quiet splash vt.handoff=7
 initrd  /boot/initrd.img-2.6.38-11-generic

You want to change the line that I have identified above to read:

linux   /boot/vmlinuz-2.6.38-11-generic root=UUID=337e2841-fc82-61b3-84be-5a9c71ae43b8 ro quiet splash vt.handoff=7 nolapic acpi=off

After adding these switches to the boot menu option, press ctrl-X, then save and exit.

This is for a permanent change if you can boot using an older kernel.

3: If you cannot login to an older kernel or recovery mode because of the kernel_thread_helper error,  you have to press “e” (without the quotation marks)  to edit the boot options when you get the grub menu.

For the kernel you want to use, edit the end of the line that reads

linux   /boot/vmlinuz-2.6.38-11-generic root=UUID=337e2841-fc82-61b3-84be-5a9c71ae43b8 ro quiet splash vt.handoff=7


linux   /boot/vmlinuz-2.6.38-11-generic root=UUID=337e2841-fc82-61b3-84be-5a9c71ae43b8 ro quiet splash vt.handoff=7 nolapic acpi=off

Press Enter and you should be able to boot.